SC2.2 v4 – how to open case?

  1. Home
  2. Forums
  3. Ask Ted
  4. SC2.2 v4 – how to open case?

Home Forums Ask Ted SC2.2 v4 – how to open case?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #15402
    AvatarBN1studio
    Participant

      I have a newly-acquired SC 2.2 v4 and, being nosey, want to take a look inside the case. It’s a clamshell design but it doesn’t want to split easily into two halves

      I have a suspicion the knobs & pot retaining nuts need to come off but would welcome confirmation!

      Nick Froome

      #16167
      Ted FletcherTed Fletcher
      Keymaster

        Hi Nick,

        NO! leave the knobs alone. The problem with those (and it is often a problem) is that you have to release the liners of the XLR connectors. This needs a fine flat-blade screwdriver giving the locke in the XLR connectors 1/4 turn anti-clocwise which releases them.

        It’s not easy! 😳 😳 😥 It usually takes me some time!!! :?

        #16168
        AvatarBN1studio
        Participant

          Ted

          Many thanks. I have come across that before. I’ll put the 3-foot pry bar back in the toolbox…

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.
        Menu