Joemeek SC2.2 Vu meter

Home Forums Ask Ted Joemeek SC2.2 Vu meter

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #15330

    Hi Ted,

    First, thanks for your board. I’m sure i will learn a lot…

    I have a question about the Vu-meter of a joemeek SC2.2

    Mine is mechanically dead (the spring is not functioning properly) and it doesn’t return to the left.

    Can you provide a vu-meter for this beast ? Or do you know where i can find one ?

    Thanks for your help,


    Ted Fletcher

    Hi Juanito,

    I may not be able to help here. The meters on the JoeMeek SC2.2 varied in type, Some of them were ‘Monacor’ from Germany. Some of the later ones were specially made for us by a company in Taiwan…. and I do have some of those in stock still.

    Please check the exact size of the front panel cut-out and I will see if I have a suitable meter.

    I have meters for cutout size 62mm X 37mm, and also a larger meter of cutout 85mm X 45mm. These are both with VU scales and with illumination.

    The smaller meters are available from me for UK£12 each and the larger ones for UK£19.50 each. :)


    Hi ted,

    Thanks your for your explanation.

    The meter cutout cutout size is 85mm X 45mm.

    I’m really happy you have the meter in stock :)

    For the order, How to you want to proceed ?


    Ted Fletcher

    Hi Juanito, I am sending you a private reply. :)

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.