- AuthorPosts
- July 16, 2018 at 11:37 am #15400
Hi Ted, if I use the individual outs on the 828 does that channel still come out of the main stereo out as well? Are they pre/post eq/fader? Thanks. July 16, 2018 at 7:38 pm #16161I’m going to be a bit rough on you… Individual channel outs are always a post fader feed and they don’t affect the main stereo bus output. You should know this.
The output is post mic amp, post EQ and post fader. The stereo output is unaffected.
The purpose originally was to be able to take a feed from each channel to a multi-track machine and use the stereo out just as a real-time monitor. Of course, that was before the introduction of ProTools!
Nowadays, like everyone else, I record individual tracks (using my BRICK2 wherever possible!) and mix down using an old 828S, the perfect analogue mixdown.
July 16, 2018 at 7:53 pm #16162Thanks Ted. October 3, 2018 at 12:12 pm #16163I modified 4 of my 828 channels for Pre fader Direct Outs, really easy to do - AuthorPosts
- You must be logged in to reply to this topic.