Home Forums Ask Ted SC2.2 voltage regulator Reply To: SC2.2 voltage regulator

Ted FletcherTed Fletcher

You can identify the correct IC because it is the only dual op-amp with a 680 ohm resistor between pins 1 and 2.

Confusingly, on some slightly later SC2.2 versions, the IC was designated IC9.

On my ‘re-invention’ of the old SC2 (TFPRO P38) I altered the design of the power supply so that it became a true dual supply with two regulators, but some say that the older version with the slightly ‘sloppy’ power supply had a particular character caused by the power supply deficiency! I don’t think so.

All the same there are many hundreds of those old SC2s still in use and they have proved to be reliable…… except for this one! :(