Home Forums Ask Ted Sc2 v1.07 rear output knob V1 Reply To: Sc2 v1.07 rear output knob V1

Ted FletcherTed Fletcher

    Ah! So the problem is over-compression on one side….. That is always caused by one of the opto resistors being more sensitive than the other, it can be an ‘ageing ‘ problem.

    Under the lightproof box there are two light cells (type ORP12) and a pair of LEDs. Physically moving the light cells will give different compression results.

    Pls email me separately at ted@tfpro.com and I will be sure that you have the schematic.