Forum Replies Created

Viewing 7 posts - 16 through 22 (of 22 total)
  • Author
    Posts
  • in reply to: Sc2 v1.07 rear output knob V1 #15856
    supafuzz
    Participant

    Rare?? I thought the v1.07 with the rear output gain knob was common. If so that’s very good news. Thanks

    in reply to: Sc2 v1.07 rear output knob V1 #15858
    supafuzz
    Participant

    Ok testing done and It seems to be the wiring on the xlr output. The volume is lower on one side and then intermittently comes back. So we will have that checked out and all should be well.

    in reply to: Sc2 v1.07 rear output knob V1 #15859
    supafuzz
    Participant

    Yes I realized and that’s why I wound you right back!!!

    thanks for the info got your e-mail

    Going to check the outputs…could be the problem there.

    When running a test tone in and just looking at the meter it seems it’s compressing exactly the same left and right

    I’ll have to listen to the output now both xlr and 1/4″

    H

    in reply to: Sc2 v1.07 rear output knob V1 #15861
    supafuzz
    Participant

    I said “MAY WANT TO SELL”….just leaving my options open..lol.

    Hi Ted I took it out of the rack and will test it more thoroughly and get back to you with the results.

    I’m going to see my tech guy on wed and he can take care of repairs…Philadelphia is a little closer to NYC than England.

    So I could use the circuit info.

    thanks!

    Harley

    in reply to: Sc2.0 v1.07 reverting to 1.05 #15720
    supafuzz
    Participant

    Got the schematics thanks. It says that’s it’s 1.05 rev 7 is that the one that went into production?

    Ted you are a true gentleman!!

    Harley

    in reply to: Sc2.0 v1.07 reverting to 1.05 #15723
    supafuzz
    Participant

    thanks Ted
    sent you and e-mail

    in reply to: Sc2.0 v1.07 reverting to 1.05 #15722
    supafuzz
    Participant

    Hi Ted thanks for the reply.

    I read some where that there were changes to the attack times or response of the attack when the layout changed.
    Or could it have something to do with the changing of the output stage?

    You are the designer and ultimately the source so I trust that no one else knows this box like you do.
    I’m just wondering why people think that the 1.05 sounds/works better??

    I spend a bit time reading posts/reviews on the internet to try and learn about different pieces of gear. You have to slog through a lot of opinions and BS to get to the facts
    or at least see patterns emerging. When it comes to the sc2 1.05 I seems to have read this too many dozens of times to ignore it.
    Is it mass hysteria? or suburban myth

    I have come to realize there are a lot of amateurs out there with bedroom/basement studios and no lack of opinions but I’ve read this from working pros who’s opinions have at least a little more weight.

    Would you mind sending me the particulars on the 1.05?

    Re: parallel compression, I understand the concept and I think it’s cool that the sc2 does that..it will certainly save me a step or two in the mixing process.

    thanks
    Harley
    zeroville recording nyc

Viewing 7 posts - 16 through 22 (of 22 total)